OSCOMPSTAT |
ERROR |
MEANING |
-8 |
LZERROR_UNKNOWNALG |
Compression algorithm not recognized. |
-7 |
LZERROR_BADVALUE |
Input parameter out
of acceptable range. |
-6 |
LZERROR_GLOBLOCK |
Bad global handle. |
-5 |
LZERROR_GLOBALLOC |
Insufficient memory
for LZFile structure. |
-4 |
LZERROR_WRITE |
Out of space for
output file. |
-3 |
LZERROR_READ |
Corrupt compressed
file format. |
-2 |
LZERROR_BADOUTHANDLE |
Invalid output
handle. |
-1 |
LZERROR_BADINHANDLE |
Invalid input handle. |
0 |
NO_ERROR |
No error. |
0 |
ERROR_SUCCESS |
The operation was
successfully completed. |
1 |
ERROR_INVALID_FUNCTION |
The function is
incorrect. |
2 |
ERROR_FILE_NOT_FOUND |
The system cannot
find the file specified. |
3 |
ERROR_PATH_NOT_FOUND |
The system cannot
find the specified path. |
4 |
ERROR_TOO_MANY_OPEN_FILES |
The system cannot
open the file. |
5 |
ERROR_ACCESS_DENIED |
Access is denied. |
6 |
ERROR_INVALID_HANDLE |
The internal file
identifier is incorrect. |
7 |
ERROR_ARENA_TRASHED |
The storage control
blocks were destroyed. |
8 |
ERROR_NOT_ENOUGH_MEMORY |
Not enough storage is
available to process this command. |
9 |
ERROR_INVALID_BLOCK |
The storage control
block address is invalid. |
10 |
ERROR_BAD_ENVIRONMENT |
The environment is
incorrect. |
11 |
ERROR_BAD_FORMAT |
An attempt was made
to load a program with an incorrect format. |
12 |
ERROR_INVALID_ACCESS |
The access code is
invalid. |
13 |
ERROR_INVALID_DATA |
The data is invalid. |
14 |
ERROR_OUTOFMEMORY |
Not enough storage is
available to complete this operation. |
15 |
ERROR_INVALID_DRIVE |
The system cannot
find the specified drive. |
16 |
ERROR_CURRENT_DIRECTORY |
The directory cannot
be removed. |
17 |
ERROR_NOT_SAME_DEVICE |
The system cannot
move the file to a different disk drive. |
18 |
ERROR_NO_MORE_FILES |
There are no more
files. |
19 |
ERROR_WRITE_PROTECT |
The media is write
protected. |
20 |
ERROR_BAD_UNIT |
The system cannot
find the specified device. |
21 |
ERROR_NOT_READY |
The drive is not
ready. |
22 |
ERROR_BAD_COMMAND |
The device does not
recognize the command. |
23 |
ERROR_CRC |
Data error (cyclic
redundancy check). |
24 |
ERROR_BAD_LENGTH |
The program issued a
command but the command length is incorrect. |
25 |
ERROR_SEEK |
The drive cannot
locate a specific area or track on the disk. |
26 |
ERROR_NOT_DOS_DISK |
The specified disk
cannot be accessed. |
27 |
ERROR_SECTOR_NOT_FOUND |
The drive cannot find
the requested sector. |
28 |
ERROR_OUT_OF_PAPER |
The printer is out of
paper. |
29 |
ERROR_WRITE_FAULT |
The system cannot
write to the specified device. |
30 |
ERROR_READ_FAULT |
The system cannot
read from the specified device. |
31 |
ERROR_GEN_FAILURE |
A device attached to
the system is not functioning. |
32 |
ERROR_SHARING_VIOLATION |
The process cannot
access the file because it is being used by another process. |
33 |
ERROR_LOCK_VIOLATION |
The process cannot
access the file because another process has locked a portion of the file. |
34 |
ERROR_WRONG_DISK |
The wrong disk is in
the drive. Insert %2 (Volume Serial Number: %3) into drive %1. |
36 |
ERROR_SHARING_BUFFER_EXCEEDED |
Too many files opened
for sharing. |
38 |
ERROR_HANDLE_EOF |
Reached End Of File. |
39 |
ERROR_HANDLE_DISK_FULL |
The disk is full. |
50 |
ERROR_NOT_SUPPORTED |
The network request
is not supported. |
51 |
ERROR_REM_NOT_LIST |
The remote computer
is not available. |
52 |
ERROR_DUP_NAME |
A duplicate name
exists on the network. |
53 |
ERROR_BAD_NETPATH |
The network path was
not found. |
54 |
ERROR_NETWORK_BUSY |
The network is busy. |
55 |
ERROR_DEV_NOT_EXIST |
The specified network
resource is no longer available. |
56 |
ERROR_TOO_MANY_CMDS |
The network BIOS
command limit has been reached. |
57 |
ERROR_ADAP_HDW_ERR |
A network adapter
hardware error occurred. |
58 |
ERROR_BAD_NET_RESP |
The specified server
cannot perform the requested operation. |
59 |
ERROR_UNEXP_NET_ERR |
An unexpected network
error occurred. |
60 |
ERROR_BAD_REM_ADAP |
The remote adapter is
not compatible. |
61 |
ERROR_PRINTQ_FULL |
The printer queue is
full. |
62 |
ERROR_NO_SPOOL_SPACE |
Space to store the
file waiting to be printed is not available on the server. |
63 |
ERROR_PRINT_CANCELLED |
File waiting to be
printed was deleted. |
64 |
ERROR_NETNAME_DELETED |
The specified network
name is no longer available. |
65 |
ERROR_NETWORK_ACCESS_DENIED |
Network access is
denied. |
66 |
ERROR_BAD_DEV_TYPE |
The network resource
type is incorrect. |
67 |
ERROR_BAD_NET_NAME |
The network name
cannot be found. |
68 |
ERROR_TOO_MANY_NAMES |
The name limit for
the local computer network adapter card exceeded. |
69 |
ERROR_TOO_MANY_SESS |
The network BIOS
session limit exceeded. |
70 |
ERROR_SHARING_PAUSED |
The remote server is
paused or is in the process of being started. |
71 |
ERROR_REQ_NOT_ACCEP |
The network request
was not accepted. |
72 |
ERROR_REDIR_PAUSED |
The specified printer
or disk device has been paused. |
80 |
ERROR_FILE_EXISTS |
The file exists. |
82 |
ERROR_CANNOT_MAKE |
The directory or file
cannot be created. |
83 |
ERROR_FAIL_I24 |
Fail on INT 24. |
84 |
ERROR_OUT_OF_STRUCTURES |
Storage to process
this request is not available. |
85 |
ERROR_ALREADY_ASSIGNED |
The local device name
is already in use. |
86 |
ERROR_INVALID_PASSWORD |
The specified network
password is incorrect. |
87 |
ERROR_INVALID_PARAMETER |
The parameter is
incorrect. |
88 |
ERROR_NET_WRITE_FAULT |
A write fault
occurred on the network. |
89 |
ERROR_NO_PROC_SLOTS |
The system cannot
start another process at this time. |
100 |
ERROR_TOO_MANY_SEMAPHORES |
Cannot create another
system semaphore. |
101 |
ERROR_EXCL_SEM_ALREADY_OWNED |
The exclusive
semaphore is owned by another process. |
102 |
ERROR_SEM_IS_SET |
The semaphore is set
and cannot be closed. |
103 |
ERROR_TOO_MANY_SEM_REQUESTS |
The semaphore cannot
be set again. |
104 |
ERROR_INVALID_AT_INTERRUPT_TIME |
Cannot request
exclusive semaphores at interrupt time. |
105 |
ERROR_SEM_OWNER_DIED |
The previous
ownership of this semaphore has ended. |
106 |
ERROR_SEM_USER_LIMIT |
Insert the disk for
drive 1. |
107 |
ERROR_DISK_CHANGE |
Program stopped
because alternate disk was not inserted. |
108 |
ERROR_DRIVE_LOCKED |
The disk is in use or
locked by another process. |
109 |
ERROR_BROKEN_PIPE |
The pipe was ended. |
110 |
ERROR_OPEN_FAILED |
The system cannot
open the specified device or file. |
111 |
ERROR_BUFFER_OVERFLOW |
The file name is too
long. |
112 |
ERROR_DISK_FULL |
There is not enough
space on the disk. |
113 |
ERROR_NO_MORE_SEARCH_HANDLES |
No more internal file
identifiers available. |
114 |
ERROR_INVALID_TARGET_HANDLE |
The target internal
file identifier is incorrect. |
117 |
ERROR_INVALID_CATEGORY |
The IOCTL call made
by the application program is incorrect. |
118 |
ERROR_INVALID_VERIFY_SWITCH |
The verify-on-write
switch parameter value is incorrect. |
119 |
ERROR_BAD_DRIVER_LEVEL |
The system does not
support the requested command. |
120 |
ERROR_CALL_NOT_IMPLEMENTED |
The Application
Program Interface (API) entered will only work in Windows/NT mode. |
121 |
ERROR_SEM_TIMEOUT |
The semaphore timeout
period has expired. |
122 |
ERROR_INSUFFICIENT_BUFFER |
The data area passed
to a system call is too small. |
123 |
ERROR_INVALID_NAME |
The file name,
directory name, or volume label is syntactically incorrect. |
124 |
ERROR_INVALID_LEVEL |
The system call level
is incorrect. |
125 |
ERROR_NO_VOLUME_LABEL |
The disk has no
volume label. |
126 |
ERROR_MOD_NOT_FOUND |
The specified module
cannot be found. |
127 |
ERROR_PROC_NOT_FOUND |
The specified
procedure could not be found. |
128 |
ERROR_WAIT_NO_CHILDREN |
There are no child
processes to wait for. |
129 |
ERROR_CHILD_NOT_COMPLETE |
The %1 application
cannot be run in Windows mode. |
130 |
ERROR_DIRECT_ACCESS_HANDLE |
Attempt to use a file
handle to an open disk partition for an operation other than raw disk I/O. |
131 |
ERROR_NEGATIVE_SEEK |
An attempt was made
to move the file pointer before the beginning of the file. |
132 |
ERROR_SEEK_ON_DEVICE |
The file pointer
cannot be set on the specified device or file. |
133 |
ERROR_IS_JOIN_TARGET |
A JOIN or SUBST
command cannot be used for a drive that contains previously joined drives. |
134 |
ERROR_IS_JOINED |
An attempt was made
to use a JOIN or SUBST command on a drive that is already joined. |
135 |
ERROR_IS_SUBSTED |
An attempt was made
to use a JOIN or SUBST command on a drive already substituted. |
136 |
ERROR_NOT_JOINED |
The system attempted
to delete the JOIN of a drive not previously joined. |
137 |
ERROR_NOT_SUBSTED |
The system attempted
to delete the substitution of a drive not previously substituted. |
138 |
ERROR_JOIN_TO_JOIN |
The system tried to
join a drive to a directory on a joined drive. |
139 |
ERROR_SUBST_TO_SUBST |
The system attempted
to substitute a drive to a directory on a substituted drive. |
140 |
ERROR_JOIN_TO_SUBST |
The system tried to
join a drive to a directory on a substituted drive. |
141 |
ERROR_SUBST_TO_JOIN |
The system attempted
to SUBST a drive to a directory on a joined drive. |
142 |
ERROR_BUSY_DRIVE |
The system cannot
perform a JOIN or SUBST at this time. |
143 |
ERROR_SAME_DRIVE |
The system cannot
join or substitute a drive to or for a directory on the same drive. |
144 |
ERROR_DIR_NOT_ROOT |
The directory is not
a subdirectory of the root directory. |
145 |
ERROR_DIR_NOT_EMPTY |
The directory is not
empty. |
146 |
ERROR_IS_SUBST_PATH |
The path specified is
being used in a substitute. |
147 |
ERROR_IS_JOIN_PATH |
Not enough resources
are available to process this command. |
148 |
ERROR_PATH_BUSY |
The specified path
cannot be used at this time. |
149 |
ERROR_IS_SUBST_TARGET |
An attempt was made
to join or substitute a drive for which a directory on the drive is the
target of a previous substitute. |
150 |
ERROR_SYSTEM_TRACE |
System trace
information not specified in your CONFIG.SYS file, or tracing is not allowed. |
151 |
ERROR_INVALID_EVENT_COUNT |
The number of
specified semaphore events is incorrect. |
152 |
ERROR_TOO_MANY_MUXWAITERS |
Too many semaphores
are already set. |
153 |
ERROR_INVALID_LIST_FORMAT |
The list is not
correct. |
154 |
ERROR_LABEL_TOO_LONG |
The volume label
entered exceeds the 11 character limit. The first 11 characters were written
to disk. Any characters that exceeded the 11 character limit were
automatically deleted. |
155 |
ERROR_TOO_MANY_TCBS |
Cannot create another
thread. |
156 |
ERROR_SIGNAL_REFUSED |
The recipient process
has refused the signal. |
157 |
ERROR_DISCARDED |
The segment is
already discarded and cannot be locked. |
158 |
ERROR_NOT_LOCKED |
The segment is
already unlocked. |
159 |
ERROR_BAD_THREADID_ADDR |
The address for the
thread ID is incorrect. |
160 |
ERROR_BAD_ARGUMENTS |
The argument string
passed to DosExecPgm is incorrect. |
161 |
ERROR_BAD_PATHNAME |
The specified path
name is invalid. |
162 |
ERROR_SIGNAL_PENDING |
A signal is already
pending. |
164 |
ERROR_MAX_THRDS_REACHED |
No more threads can
be created in the system. |
167 |
ERROR_LOCK_FAILED |
Attempt to lock a
region of a file failed. |
170 |
ERROR_BUSY |
The requested
resource is in use. |
173 |
ERROR_CANCEL_VIOLATION |
A lock request was
not outstanding for the supplied cancel region. |
174 |
ERROR_ATOMIC_LOCKS_NOT_SUPPORTED |
The file system does
not support atomic changing of the lock type. |
180 |
ERROR_INVALID_SEGMENT_NUMBER |
The system detected a
segment number that is incorrect. |
182 |
ERROR_INVALID_ORDINAL |
The operating system
cannot run %1. |
183 |
ERROR_ALREADY_EXISTS |
Attempt to create
file that already exists. |
186 |
ERROR_INVALID_FLAG_NUMBER |
The flag passed is
incorrect. |
187 |
ERROR_SEM_NOT_FOUND |
The specified system
semaphore name was not found. |
188 |
ERROR_INVALID_STARTING_CODESEG |
The operating system
cannot run %1. |
189 |
ERROR_INVALID_STACKSEG |
The operating system
cannot run %1. |
190 |
ERROR_INVALID_MODULETYPE |
The operating system
cannot run %1. |
191 |
ERROR_INVALID_EXE_SIGNATURE |
%1 cannot be run in
Windows/NT mode. |
192 |
ERROR_EXE_MARKED_INVALID |
The operating system
cannot run %1. |
193 |
ERROR_BAD_EXE_FORMAT |
%1 is not a valid
Windows-based application. |
194 |
ERROR_ITERATED_DATA_EXCEEDS_64k |
The operating system
cannot run %1. |
195 |
ERROR_INVALID_MINALLOCSIZE |
The operating system
cannot run %1. |
196 |
ERROR_DYNLINK_FROM_INVALID_RING |
The operating system
cannot run this application program. |
197 |
ERROR_IOPL_NOT_ENABLED |
The operating system
is not presently configured to run this application. |
198 |
ERROR_INVALID_SEGDPL |
The operating system
cannot run %1. |
199 |
ERROR_AUTODATASEG_EXCEEDS_64k |
The operating system
cannot run this application program. |
200 |
ERROR_RING2SEG_MUST_BE_MOVABLE |
The code segment
cannot be greater than or equal to 64KB. |
201 |
ERROR_RELOC_CHAIN_XEEDS_SEGLIM |
The operating system
cannot run %1. |
202 |
ERROR_INFLOOP_IN_RELOC_CHAIN |
The operating system
cannot run %1. |
203 |
ERROR_ENVVAR_NOT_FOUND |
The system could not
find the environment option entered. |
205 |
ERROR_NO_SIGNAL_SENT |
No process in the
command subtree has a signal handler. |
206 |
ERROR_FILENAME_EXCED_RANGE |
The file name or
extension is too long. |
207 |
ERROR_RING2_STACK_IN_USE |
The ring 2 stack is
in use. |
208 |
ERROR_META_EXPANSION_TOO_LONG |
The global filename
characters * or ? are entered incorrectly, or too many global filename
characters are specified. |
209 |
ERROR_INVALID_SIGNAL_NUMBER |
The signal being
posted is incorrect. |
210 |
ERROR_THREAD_1_INACTIVE |
The signal handler
cannot be set. |
212 |
ERROR_LOCKED |
The segment is locked
and cannot be reallocated. |
214 |
ERROR_TOO_MANY_MODULES |
Too many dynamic link
modules are attached to this program or dynamic link module. |
215 |
ERROR_NESTING_NOT_ALLOWED |
Can't nest calls to
LoadModule. |
230 |
ERROR_BAD_PIPE |
The pipe state is
invalid. |
231 |
ERROR_PIPE_BUSY |
All pipe instances
busy. |
232 |
ERROR_NO_DATA |
Pipe close in
progress. |
233 |
ERROR_PIPE_NOT_CONNECTED |
No process on other
end of pipe. |
234 |
ERROR_MORE_DATA |
More data is
available. |
240 |
ERROR_VC_DISCONNECTED |
The session was
canceled. |
254 |
ERROR_INVALID_EA_NAME |
The specified EA name
is invalid. |
255 |
ERROR_EA_LIST_INCONSISTENT |
The EAs are
inconsistent. |
259 |
ERROR_NO_MORE_ITEMS |
No more data is
available. |
266 |
ERROR_CANNOT_COPY |
The Copy API cannot
be used. |
267 |
ERROR_DIRECTORY |
The directory name is
invalid. |
275 |
ERROR_EAS_DIDNT_FIT |
The EAs did not fit
in the buffer. |
276 |
ERROR_EA_FILE_CORRUPT |
The EA file on the
mounted file system is damaged. |
277 |
ERROR_EA_TABLE_FULL |
The EA table in the
EA file on the mounted file system is full. |
278 |
ERROR_INVALID_EA_HANDLE |
The specified EA
handle is invalid. |
282 |
ERROR_EAS_NOT_SUPPORTED |
The mounted file
system does not support extended attributes. |
288 |
ERROR_NOT_OWNER |
Attempt to release
mutex not owned by caller. |
298 |
ERROR_TOO_MANY_POSTS |
Too many posts made
to a semaphore. |
299 |
ERROR_PARTIAL_COPY |
Only part of a
Read/WriteProcessMemory request was completed. |
317 |
ERROR_MR_MID_NOT_FOUND |
The system cannot
find message for message number 0x%1 in message file for %2. |
487 |
ERROR_INVALID_ADDRESS |
Attempt to access
invalid address. |
534 |
ERROR_ARITHMETIC_OVERFLOW |
Arithmetic result
exceeded 32-bits. |
535 |
ERROR_PIPE_CONNECTED |
There is a process on
other end of the pipe. |
536 |
ERROR_PIPE_LISTENING |
Waiting for a process
to open the other end of the pipe. |
994 |
ERROR_EA_ACCESS_DENIED |
Access to the EA is
denied. |
995 |
ERROR_OPERATION_ABORTED |
The I/O operation was
aborted due to either thread exit or application request. |
996 |
ERROR_IO_INCOMPLETE |
Overlapped IO event
not in signaled state. |
997 |
ERROR_IO_PENDING |
Overlapped IO
operation in progress. |
998 |
ERROR_NOACCESS |
Invalid access to
memory location. |
999 |
ERROR_SWAPERROR |
Error accessing
paging file. |
1001 |
ERROR_STACK_OVERFLOW |
Recursion too deep,
stack overflowed. |
1002 |
ERROR_INVALID_MESSAGE |
Window can't handle
sent message. |
1003 |
ERROR_CAN_NOT_COMPLETE |
Cannot complete
function for some reason. |
1004 |
ERROR_INVALID_FLAGS |
The flags are
invalid. |
1005 |
ERROR_UNRECOGNIZED_VOLUME |
The volume does not
contain a recognized file system. Make sure that all required file system
drivers are loaded and the volume is not damaged. |
1006 |
ERROR_FILE_INVALID |
The volume for a file
was externally altered and the opened file is no longer valid. |
1007 |
ERROR_FULLSCREEN_MODE |
The requested
operation cannot be performed in full-screen mode. |
1008 |
ERROR_NO_TOKEN |
An attempt was made
to reference a token that does not exist. |
1009 |
ERROR_BADDB |
The configuration
registry database is damaged. |
1010 |
ERROR_BADKEY |
The configuration
registry key is invalid. |
1011 |
ERROR_CANTOPEN |
The configuration
registry key cannot be opened. |
1012 |
ERROR_CANTREAD |
The configuration
registry key cannot be read. |
1013 |
ERROR_CANTWRITE |
The configuration
registry key cannot be written. |
1014 |
ERROR_REGISTRY_RECOVERED |
One of the files
containing the system's registry data had to be recovered by use of a log or
alternate copy. The recovery succeeded. |
1015 |
ERROR_REGISTRY_CORRUPT |
The registry is
damaged. The structure of one of the files that contains registry data is
damaged, or the system's in memory image of the file is damaged, or the file
could not be recovered because its alternate copy or log was absent or
damaged. |
1016 |
ERROR_REGISTRY_IO_FAILED |
The registry
initiated an I/O operation that had an unrecoverable failure. The registry
could not read in, or write out, or flush, one of the files that contain the
system's image of the registry. |
1017 |
ERROR_NOT_REGISTRY_FILE |
The system attempted
to load or restore a file into the registry, and the specified file is not in
the format of a registry file. |
1018 |
ERROR_KEY_DELETED |
Illegal operation
attempted on a registry key that has been marked for deletion. |
1019 |
ERROR_NO_LOG_SPACE |
System could not
allocate required space in a registry log. |
1020 |
ERROR_KEY_HAS_CHILDREN |
An attempt was made
to create a symbolic link in a registry key that already has subkeys or
values. |
1021 |
ERROR_CHILD_MUST_BE_VOLATILE |
An attempt was made
to create a stable subkey under a volatile parent key. |
1022 |
ERROR_NOTIFY_ENUM_DIR |
This indicates that a
notify change request is being completed and the information is not being
returned in the caller's buffer. The caller now needs to enumerate the files
to find the changes. |
1051 |
ERROR_DEPENDENT_SERVICES_RUNNING |
A stop control has
been sent to a service which other running services are dependent on. |
1052 |
ERROR_INVALID_SERVICE_CONTROL |
The requested control
is not valid for this service |
1053 |
ERROR_SERVICE_REQUEST_TIMEOUT |
The service did not
respond to the start or control request in a timely fashion. |
1054 |
ERROR_SERVICE_NO_THREAD |
A thread could not be
created for the service. |
1055 |
ERROR_SERVICE_DATABASE_LOCKED |
The service database
is locked. |
1056 |
ERROR_SERVICE_ALREADY_RUNNING |
An instance of the
service is already running. |
1057 |
ERROR_INVALID_SERVICE_ACCOUNT |
The account name is
invalid or does not exist. |
1058 |
ERROR_SERVICE_DISABLED |
The specified service
is disabled and cannot be started. |
1059 |
ERROR_CIRCULAR_DEPENDENCY |
Circular service
dependency was specified. |
1060 |
ERROR_SERVICE_DOES_NOT_EXIST |
The specified service
does not exist as an installed service. |
1061 |
ERROR_SERVICE_CANNOT_ACCEPT_CTRL |
The service cannot
accept control messages at this time. |
1062 |
ERROR_SERVICE_NOT_ACTIVE |
The service has not
been started. |
1063 |
ERROR_FAILED_SERVICE_CONTROLLER_CONNECT |
The service process
could not connect to the service controller. |
1064 |
ERROR_EXCEPTION_IN_SERVICE |
An exception occurred
in the service when handling the control request. |
1065 |
ERROR_DATABASE_DOES_NOT_EXIST |
The database
specified does not exist. |
1066 |
ERROR_SERVICE_SPECIFIC_ERROR |
The service has
returned a service-specific error code. |
1067 |
ERROR_PROCESS_ABORTED |
The process
terminated unexpectedly. |
1068 |
ERROR_SERVICE_DEPENDENCY_FAIL |
The dependency
service or group failed to start. |
1069 |
ERROR_SERVICE_LOGON_FAILED |
The service did not
start due to a logon failure. |
1070 |
ERROR_SERVICE_START_HANG |
After starting, the
service hung in a start-pending state. |
1071 |
ERROR_INVALID_SERVICE_LOCK |
The specified service
database lock is invalid. |
1072 |
ERROR_SERVICE_MARKED_FOR_DELETE |
The specified service
has been marked for deletion. |
1073 |
ERROR_SERVICE_EXISTS |
The specified service
already exists. |
1074 |
ERROR_ALREADY_RUNNING_LKG |
The system is
currently running with the last-known-good configuration. |
1075 |
ERROR_SERVICE_DEPENDENCY_DELETED |
The dependency
service does not exist or has been marked for deletion. |
1076 |
ERROR_BOOT_ALREADY_ACCEPTED |
The current boot has
already been accepted for use as the last-known-good control set. |
1077 |
ERROR_SERVICE_NEVER_STARTED |
No attempts to start
the service have been made since the last boot. |
1078 |
ERROR_DUPLICATE_SERVICE_NAME |
The name is already
in use as either a service name or a service display name. |
1079 |
ERROR_DIFFERENT_SERVICE_ACCOUNT |
The account specified
for this service is different from the account specified for other services
running in the same process. |
1100 |
ERROR_END_OF_MEDIA |
The physical end of
the tape has been reached. |
1101 |
ERROR_FILEMARK_DETECTED |
A tape access reached
a filemark. |
1102 |
ERROR_BEGINNING_OF_MEDIA |
The beginning of the
tape or partition was encountered. |
1103 |
ERROR_SETMARK_DETECTED |
A tape access reached
a setmark. |
1104 |
ERROR_NO_DATA_DETECTED |
During a tape access,
the end of the data marker was reached. |
1105 |
ERROR_PARTITION_FAILURE |
Tape could not be
partitioned. |
1106 |
ERROR_INVALID_BLOCK_LENGTH |
When accessing a new
tape of a multivolume partition, the current block size is incorrect. |
1107 |
ERROR_DEVICE_NOT_PARTITIONED |
Tape partition
information could not be found when loading a tape. |
1108 |
ERROR_UNABLE_TO_LOCK_MEDIA |
Attempt to lock the
eject media mechanism failed. |
1109 |
ERROR_UNABLE_TO_UNLOAD_MEDIA |
Unload media failed. |
1110 |
ERROR_MEDIA_CHANGED |
Media in drive may
have changed. |
1111 |
ERROR_BUS_RESET |
The I/O bus was
reset. |
1112 |
ERROR_NO_MEDIA_IN_DRIVE |
Tape query failed
because of no media in drive. |
1113 |
ERROR_NO_UNICODE_TRANSLATION |
No mapping for the
Unicode character exists in the target multi-byte code page. |
1114 |
ERROR_DLL_INIT_FAILED |
A DLL initialization
routine failed. |
1115 |
ERROR_SHUTDOWN_IN_PROGRESS |
A system shutdown is
in progress. |
1116 |
ERROR_NO_SHUTDOWN_IN_PROGRESS |
An attempt to abort
the shutdown of the system failed because no shutdown was in progress. |
1117 |
ERROR_IO_DEVICE |
The request could not
be performed because of an I/O device error. |
1118 |
ERROR_SERIAL_NO_DEVICE |
No serial device was
successfully initialized. The serial driver will unload. |
1119 |
ERROR_IRQ_BUSY |
Unable to open a
device that was sharing an interrupt request (IRQ) with other devices. At
least one other device that uses that IRQ was already opened. |
1120 |
ERROR_MORE_WRITES |
A serial I/O
operation was completed by another write to the serial port. (The
IOCTL_SERIAL_XOFF_COUNTER reached zero.) |
1121 |
ERROR_COUNTER_TIMEOUT |
A serial I/O
operation completed because the time-out period expired. (The
IOCTL_SERIAL_XOFF_COUNTER did not reach zero.) |
1122 |
ERROR_FLOPPY_ID_MARK_NOT_FOUND |
No ID address mark
was found on the floppy disk. |
1123 |
ERROR_FLOPPY_WRONG_CYLINDER |
Mismatch between the
floppy disk sector ID field and the floppy disk controller track address. |
1124 |
ERROR_FLOPPY_UNKNOWN_ERROR |
The floppy disk
controller reported an error that is not recognized by the floppy disk
driver. |
1125 |
ERROR_FLOPPY_BAD_REGISTERS |
The floppy disk
controller returned inconsistent results in its registers. |
1126 |
ERROR_DISK_RECALIBRATE_FAILED |
While accessing the
hard disk, a recalibrate operation failed, even after retries. |
1127 |
ERROR_DISK_OPERATION_FAILED |
While accessing the
hard disk, a disk operation failed even after retries. |
1128 |
ERROR_DISK_RESET_FAILED |
While accessing the
hard disk, a disk controller reset was needed, but even that failed. |
1129 |
ERROR_EOM_OVERFLOW |
Physical end of tape
encountered. |
1130 |
ERROR_NOT_ENOUGH_SERVER_MEMORY |
Not enough server
storage is available to process this command. |
1131 |
ERROR_POSSIBLE_DEADLOCK |
A potential deadlock
condition has been detected. |
1132 |
ERROR_MAPPED_ALIGNMENT |
The base address or
the file offset specified does not have the proper alignment. |
1140 |
ERROR_SET_POWER_STATE_VETOED |
An attempt to change
the system power state was vetoed by another application or driver. |
1141 |
ERROR_SET_POWER_STATE_FAILED |
The system BIOS
failed an attempt to change the system power state. |
1142 |
ERROR_TOO_MANY_LINKS |
An attempt was made
to create more links on a file than the file system supports. |
1150 |
ERROR_OLD_WIN_VERSION |
The specified program
requires a newer version of Windows. |
1151 |
ERROR_APP_WRONG_OS |
The specified program
is not a Windows or MS-DOS program. |
1152 |
ERROR_SINGLE_INSTANCE_APP |
Cannot start more
than one instance of the specified program. |
1153 |
ERROR_RMODE_APP |
The specified program
was written for an older version of Windows. |
1154 |
ERROR_INVALID_DLL |
One of the library
files needed to run this application is damaged. |
1155 |
ERROR_NO_ASSOCIATION |
No application is
associated with the specified file for this operation. |
1156 |
ERROR_DDE_FAIL |
An error occurred in
sending the command to the application. |
1157 |
ERROR_DLL_NOT_FOUND |
One of the library
files needed to run this application cannot be found. |
1200 |
ERROR_BAD_DEVICE |
The specified device
name is invalid. |
1201 |
ERROR_CONNECTION_UNAVAIL |
The device is not
currently connected but is a remembered connection. |
1202 |
ERROR_DEVICE_ALREADY_REMEMBERED |
An attempt was made
to remember a device that was previously remembered. |
1203 |
ERROR_NO_NET_OR_BAD_PATH |
No network provider
accepted the given network path. |
1204 |
ERROR_BAD_PROVIDER |
The specified network
provider name is invalid. |
1205 |
ERROR_CANNOT_OPEN_PROFILE |
Unable to open the
network connection profile. |
1206 |
ERROR_BAD_PROFILE |
The network
connection profile is damaged. |
1207 |
ERROR_NOT_CONTAINER |
Cannot enumerate a
non-container. |
1208 |
ERROR_EXTENDED_ERROR |
An extended error has
occurred. |
1209 |
ERROR_INVALID_GROUPNAME |
The format of the
specified group name is invalid. |
1210 |
ERROR_INVALID_COMPUTERNAME |
The format of the
specified computer name is invalid. |
1211 |
ERROR_INVALID_EVENTNAME |
The format of the
specified event name is invalid. |
1212 |
ERROR_INVALID_DOMAINNAME |
The format of the
specified domain name is invalid. |
1213 |
ERROR_INVALID_SERVICENAME |
The format of the
specified service name is invalid. |
1214 |
ERROR_INVALID_NETNAME |
The format of the
specified network name is invalid. |
1215 |
ERROR_INVALID_SHARENAME |
The format of the
specified share name is invalid. |
1216 |
ERROR_INVALID_PASSWORDNAME |
The format of the
specified password is invalid. |
1217 |
ERROR_INVALID_MESSAGENAME |
The format of the
specified message name is invalid. |
1218 |
ERROR_INVALID_MESSAGEDEST |
The format of the
specified message destination is invalid. |
1219 |
ERROR_SESSION_CREDENTIAL_CONFLICT |
The credentials
supplied conflict with an existing set of credentials. |
1220 |
ERROR_REMOTE_SESSION_LIMIT_EXCEEDED |
An attempt was made
to establish a session to a LAN Manager server, but there are already too
many sessions established to that server. |
1221 |
ERROR_DUP_DOMAINNAME |
The workgroup or
domain name is already in use by another computer on the network. |
1222 |
ERROR_NO_NETWORK |
The network is not
present or not started. |
1223 |
ERROR_CANCELLED |
The operation was
cancelled by the user. |
1224 |
ERROR_USER_MAPPED_FILE |
The requested
operation cannot be performed on a file with a user mapped section open. |
1225 |
ERROR_CONNECTION_REFUSED |
The remote system
refused the network connection. |
1226 |
ERROR_GRACEFUL_DISCONNECT |
The network
connection was gracefully closed. |
1227 |
ERROR_ADDRESS_ALREADY_ASSOCIATED |
The network transport
endpoint already has an address associated with it. |
1228 |
ERROR_ADDRESS_NOT_ASSOCIATED |
An address has not
yet been associated with the network endpoint. |
1229 |
ERROR_CONNECTION_INVALID |
An operation was
attempted on a non-existent network connection. |
1230 |
ERROR_CONNECTION_ACTIVE |
An invalid operation
was attempted on an active network connection. |
1231 |
ERROR_NETWORK_UNREACHABLE |
The remote network is
not reachable by the transport. |
1232 |
ERROR_HOST_UNREACHABLE |
The remote system is
not reachable by the transport. |
1233 |
ERROR_PROTOCOL_UNREACHABLE |
The remote system
does not support the transport protocol. |
1234 |
ERROR_PORT_UNREACHABLE |
No service is
operating at the destination network endpoint on the remote system. |
1235 |
ERROR_REQUEST_ABORTED |
The request was
aborted. |
1236 |
ERROR_CONNECTION_ABORTED |
The network
connection was aborted by the local system. |
1237 |
ERROR_RETRY |
The operation could
not be completed. A retry should be performed. |
1238 |
ERROR_CONNECTION_COUNT_LIMIT |
A connection to the
server could not be made because the limit on the number of concurrent
connections for this account has been reached. |
1239 |
ERROR_LOGIN_TIME_RESTRICTION |
Attempting to login
during an unauthorized time of day for this account. |
1240 |
ERROR_LOGIN_WKSTA_RESTRICTION |
The account is not
authorized to login from this station. |
1241 |
ERROR_INCORRECT_ADDRESS |
The network address
could not be used for the operation requested. |
1242 |
ERROR_ALREADY_REGISTERED |
The service is
already registered. |
1243 |
ERROR_SERVICE_NOT_FOUND |
The specified service
does not exist. |
1244 |
ERROR_NOT_AUTHENTICATED |
The operation being
requested was not performed because the user has not been authenticated. |
1245 |
ERROR_NOT_LOGGED_ON |
The operation being
requested was not performed because the user has not logged on to the
network. |
1246 |
ERROR_CONTINUE |
Return that wants
caller to continue with work in progress. |
1247 |
ERROR_ALREADY_INITIALIZED |
An attempt was made
to perform an initialization operation when initialization has already been
completed. |
1248 |
ERROR_NO_MORE_DEVICES |
No more local
devices. |
1300 |
ERROR_NOT_ALL_ASSIGNED |
Indicates not all
privileges referenced are assigned to the caller. This allows, for example,
all privileges to be disabled without having to know exactly which privileges
are assigned. |
1301 |
ERROR_SOME_NOT_MAPPED |
Some of the
information to be mapped has not been translated. |
1302 |
ERROR_NO_QUOTAS_FOR_ACCOUNT |
No system quota
limits are specifically set for this account. |
1303 |
ERROR_LOCAL_USER_SESSION_KEY |
A user session key
was requested for a local RPC connection. The session key returned is a
constant value and not unique to this connection. |
1304 |
ERROR_NULL_LM_PASSWORD |
The Windows NT
password is too complex to be converted to a Windows-networking password. The
Windows-networking password returned is a NULL string. |
1305 |
ERROR_UNKNOWN_REVISION |
Indicates an
encountered or specified revision number is not one known by the service. The
service may not be aware of a more recent revision. |
1306 |
ERROR_REVISION_MISMATCH |
Indicates two
revision levels are incompatible. |
1307 |
ERROR_INVALID_OWNER |
Indicates a
particular Security ID cannot be assigned as the owner of an object. |
1308 |
ERROR_INVALID_PRIMARY_GROUP |
Indicates a
particular Security ID cannot be assigned as the primary group of an object. |
1309 |
ERROR_NO_IMPERSONATION_TOKEN |
An attempt was made
to operate on an impersonation token by a thread was not currently
impersonating a client. |
1310 |
ERROR_CANT_DISABLE_MANDATORY |
A mandatory group
cannot be disabled. |
1311 |
ERROR_NO_LOGON_SERVERS |
There are currently
no logon servers available to service the logon request. |
1312 |
ERROR_NO_SUCH_LOGON_SESSION |
A specified logon
session does not exist. It may already have been terminated. |
1313 |
ERROR_NO_SUCH_PRIVILEGE |
A specified privilege
does not exist. |
1314 |
ERROR_PRIVILEGE_NOT_HELD |
A required privilege
is not held by the client. |
1315 |
ERROR_INVALID_ACCOUNT_NAME |
The name provided is
not a properly formed account name. |
1316 |
ERROR_USER_EXISTS |
The specified user
already exists. |
1317 |
ERROR_NO_SUCH_USER |
The specified user
does not exist. |
1318 |
ERROR_GROUP_EXISTS |
The specified group
already exists. |
1319 |
ERROR_NO_SUCH_GROUP |
The specified group
does not exist. |
1320 |
ERROR_MEMBER_IN_GROUP |
The specified user
account is already in the specified group account. Also used to indicate a
group can not be deleted because it contains a member. |
1321 |
ERROR_MEMBER_NOT_IN_GROUP |
The specified user
account is not a member of the specified group account. |
1322 |
ERROR_LAST_ADMIN |
Indicates the
requested operation would disable or delete the last remaining administration
account. This is not allowed to prevent creating a situation where the system
will not be administrable. |
1323 |
ERROR_WRONG_PASSWORD |
When trying to update
a password, this return status indicates the value provided as the current
password is incorrect. |
1324 |
ERROR_ILL_FORMED_PASSWORD |
When trying to update
a password, this return status indicates the value provided for the new
password contains values not allowed in passwords. |
1325 |
ERROR_PASSWORD_RESTRICTION |
When trying to update
a password, this status indicates that some password update rule was
violated. For example, the password may not meet length criteria. |
1326 |
ERROR_LOGON_FAILURE |
The attempted logon
is invalid. This is due to either a bad user name or authentication
information. |
1327 |
ERROR_ACCOUNT_RESTRICTION |
Indicates a
referenced user name and authentication information are valid, but some user
account restriction has prevented successful authentication (such as
time-of-day restrictions). |
1328 |
ERROR_INVALID_LOGON_HOURS |
The user account has
time restrictions and cannot be logged onto at this time. |
1329 |
ERROR_INVALID_WORKSTATION |
The user account is
restricted and cannot be used to log on from the source workstation. |
1330 |
ERROR_PASSWORD_EXPIRED |
The user account's
password has expired. |
1331 |
ERROR_ACCOUNT_DISABLED |
The referenced
account is currently disabled and cannot be logged on to. |
1332 |
ERROR_NONE_MAPPED |
None of the
information to be mapped has been translated. |
1333 |
ERROR_TOO_MANY_LUIDS_REQUESTED |
The number of
LUIDrequested cannot be allocated with a single allocation. |
1334 |
ERROR_LUIDS_EXHAUSTED |
Indicates there are
no more LUIDto allocate. |
1335 |
ERROR_INVALID_SUB_AUTHORITY |
Indicates the
sub-authority value is invalid for the particular use. |
1336 |
ERROR_INVALID_ACL |
Indicates the ACL
structure is not valid. |
1337 |
ERROR_INVALID_SID |
Indicates the
SIDstructure is invalid. |
1338 |
ERROR_INVALID_SECURITY_DESCR |
Indicates the
SECURITY_DESCRIPTOR structure is invalid. |
1340 |
ERROR_BAD_INHERITANCE_ACL |
Indicates that an
attempt to build either an inherited ACL or ACE did not succeed. One of the
more probable causes is the replacement of a CreatorId with an SID that
didn't fit into the ACE or ACL. |
1341 |
ERROR_SERVER_DISABLED |
The GUID allocation
server is already disabled at the moment. |
1342 |
ERROR_SERVER_NOT_DISABLED |
The GUID allocation
server is already enabled at the moment. |
1343 |
ERROR_INVALID_ID_AUTHORITY |
The value provided is
an invalid value for an identifier authority. |
1344 |
ERROR_ALLOTTED_SPACE_EXCEEDED |
When a block of
memory is allotted for future updates, such as the memory allocated to hold
discretionary access control and primary group information, successive
updates may exceed the amount of memory originally allotted. Since quota may
already have been charged to several processes that have handles of the
object, it is not reasonable to alter the size of the allocated memory.
Instead, a request that requires more memory than has been allotted must fail
and the ERROR_ALLOTTED_SPACE_EXCEEDED error returned. |
1345 |
ERROR_INVALID_GROUP_ATTRIBUTES |
The specified
attributes are invalid, or incompatible with the attributes for the group as
a whole. |
1346 |
ERROR_BAD_IMPERSONATION_LEVEL |
A specified
impersonation level is invalid. Also used to indicate a required
impersonation level was not provided. |
1347 |
ERROR_CANT_OPEN_ANONYMOUS |
An attempt was made
to open an anonymous level token. Anonymous tokens cannot be opened. |
1348 |
ERROR_BAD_VALIDATION_CLASS |
The requested
validation information class is invalid. |
1349 |
ERROR_BAD_TOKEN_TYPE |
The type of token
object is inappropriate for its attempted use. |
1350 |
ERROR_NO_SECURITY_ON_OBJECT |
Indicates an attempt
was made to operate on the security of an object that does not have security
associated with it. |
1351 |
ERROR_CANT_ACCESS_DOMAIN_INFO |
Indicates a domain
controller could not be contacted or that objects within the domain are
protected and necessary information could not be retrieved. |
1352 |
ERROR_INVALID_SERVER_STATE |
Indicates the Sam
Server was in the wrong state to perform the desired operation. |
1353 |
ERROR_INVALID_DOMAIN_STATE |
Indicates the domain
is in the wrong state to perform the desired operation. |
1354 |
ERROR_INVALID_DOMAIN_ROLE |
Indicates the
requested operation cannot be completed with the domain in its present role. |
1355 |
ERROR_NO_SUCH_DOMAIN |
The specified domain
does not exist. |
1356 |
ERROR_DOMAIN_EXISTS |
The specified domain
already exists. |
1357 |
ERROR_DOMAIN_LIMIT_EXCEEDED |
An attempt to exceed
the limit on the number of domains per server for this release. |
1358 |
ERROR_INTERNAL_DB_CORRUPTION |
This error indicates
the requested operation cannot be completed due to a catastrophic media
failure or on-disk data structure corruption. |
1359 |
ERROR_INTERNAL_ERROR |
This error indicates
the SAM server has encounterred an internal consistency error in its
database. This catastrophic failure prevents further operation of SAM. |
1360 |
ERROR_GENERIC_NOT_MAPPED |
Indicates generic
access types were contained in an access mask that should already be mapped
to non-generic access types. |
1361 |
ERROR_BAD_DESCRIPTOR_FORMAT |
Indicates a security
descriptor is not in the required format (absolute or self-relative). |
1362 |
ERROR_NOT_LOGON_PROCESS |
The requested action
is restricted for use by logon processes only. The calling process has not
registered as a logon process. |
1363 |
ERROR_LOGON_SESSION_EXISTS |
An attempt was made
to start a new session manager or LSA logon session with an ID already in
use. |
1364 |
ERROR_NO_SUCH_PACKAGE |
A specified
authentication package is unknown. |
1365 |
ERROR_BAD_LOGON_SESSION_STATE |
The logon session is
not in a state consistent with the requested operation. |
1366 |
ERROR_LOGON_SESSION_COLLISION |
The logon session ID
is already in use. |
1367 |
ERROR_INVALID_LOGON_TYPE |
Indicates an invalid
value has been provided for LogonType has been requested. |
1368 |
ERROR_CANNOT_IMPERSONATE |
Indicates that an
attempt was made to impersonate via a named pipe was not yet read from. |
1369 |
ERROR_RXACT_INVALID_STATE |
Indicates that the
transaction state of a registry sub-tree is incompatible with the requested
operation. For example, a request has been made to start a new transaction
with one already in progress, or a request to apply a transaction when one is
not currently in progress. This status value is returned by the runtime
library (RTL) registry transaction package (RXact). |
1370 |
ERROR_RXACT_COMMIT_FAILURE |
Indicates an error
occurred during a registry transaction commit. The database has been left in
an unknown state. The state of the registry transaction is left as
COMMITTING. This status value is returned by the runtime library (RTL)
registry transaction package (RXact). |
1371 |
ERROR_SPECIAL_ACCOUNT |
Indicates an
operation was attempted on a built-in (special) SAM account that is
incompatible with built-in accounts. For example, built-in accounts cannot be
renamed or deleted. |
1372 |
ERROR_SPECIAL_GROUP |
The requested
operation cannot be performed on the specified group because it is a built-in
special group. |
1373 |
ERROR_SPECIAL_USER |
The requested
operation cannot be performed on the specified user because it is a built-in
special user. |
1374 |
ERROR_MEMBERS_PRIMARY_GROUP |
Indicates a member
cannot be removed from a group because the group is currently the member's
primary group. |
1375 |
ERROR_TOKEN_ALREADY_IN_USE |
An attempt was made
to establish a token for use as a primary token but the token is already in
use. A token can only be the primary token of one process at a time. |
1376 |
ERROR_NO_SUCH_ALIAS |
The specified alias
does not exist. |
1377 |
ERROR_MEMBER_NOT_IN_ALIAS |
The specified account
name is not a member of the alias. |
1378 |
ERROR_MEMBER_IN_ALIAS |
The specified account
name is not a member of the alias. |
1379 |
ERROR_ALIAS_EXISTS |
The specified alias
already exists. |
1380 |
ERROR_LOGON_NOT_GRANTED |
A requested type of
logon, such as Interactive, Network, or Service, is not granted by the target
system's local security policy. The system administrator can grant the
required form of logon. |
1381 |
ERROR_TOO_MANY_SECRETS |
The maximum number of
secrets that can be stored in a single system was exceeded. The length and
number of secrets is limited to satisfy the United States State Department
export restrictions. |
1382 |
ERROR_SECRET_TOO_LONG |
The length of a
secret exceeds the maximum length allowed. The length and number of secrets
is limited to satisfy the United States State Department export restrictions. |
1383 |
ERROR_INTERNAL_DB_ERROR |
The Local Security
Authority (LSA) database contains in internal inconsistency. |
1384 |
ERROR_TOO_MANY_CONTEXT_IDS |
During a logon
attempt, the user's security context accumulated too many security IDs.
Remove the user from some groups or aliases to reduce the number of security
ids to incorporate into the security context. |
1385 |
ERROR_LOGON_TYPE_NOT_GRANTED |
A user has requested
a type of logon, such as interactive or network, that was not granted. An
administrator has control over who may logon interactively and through the
network. |
1386 |
ERROR_NT_CROSS_ENCRYPTION_REQUIRED |
An attempt was made
to change a user password in the security account manager without providing
the necessary NT cross-encrypted password. |
1387 |
ERROR_NO_SUCH_MEMBER |
A new member cannot
be added to an alias because the member does not exist. |
1388 |
ERROR_INVALID_MEMBER |
A new member could
not be added to an alias because the member has the wrong account type. |
1389 |
ERROR_TOO_MANY_SIDS |
Too many SIDs
specified. |
1390 |
ERROR_LM_CROSS_ENCRYPTION_REQUIRED |
An attempt was made
to change a user password in the security account manager without providing
the required LM cross-encrypted password. |
1391 |
ERROR_NO_INHERITANCE |
Indicates an ACL
contains no inheritable components. |
1392 |
ERROR_FILE_CORRUPT |
The file or directory
is damaged and nonreadable. |
1393 |
ERROR_DISK_CORRUPT |
The disk structure is
damaged and nonreadable. |
1394 |
ERROR_NO_USER_SESSION_KEY |
There is no user
session key for the specified logon session. |
1395 |
ERROR_LICENSE_QUOTA_EXCEEDED |
The service being
accessed is licensed for a particular number of connections. No more
connections can be made to the service at this time because there are already
as many connections as the service can accept. |
1400 |
ERROR_INVALID_WINDOW_HANDLE |
The window handle
invalid. |
1401 |
ERROR_INVALID_MENU_HANDLE |
The menu handle is
invalid. |
1402 |
ERROR_INVALID_CURSOR_HANDLE |
The cursor handle is
invalid. |
1403 |
ERROR_INVALID_ACCEL_HANDLE |
Invalid
accelerator-table handle. |
1404 |
ERROR_INVALID_HOOK_HANDLE |
The hook handle is
invalid. |
1405 |
ERROR_INVALID_DWP_HANDLE |
The
DeferWindowPoshandle is invalid. |
1406 |
ERROR_TLW_WITH_WSCHILD |
CreateWindow failed,
creating top-level window with WS_CHILDstyle. |
1407 |
ERROR_CANNOT_FIND_WND_CLASS |
Cannot find window
class. |
1408 |
ERROR_WINDOW_OF_OTHER_THREAD |
Invalid window,
belongs to other thread. |
1409 |
ERROR_HOTKEY_ALREADY_REGISTERED |
Hotkey is already
registered. |
1410 |
ERROR_CLASS_ALREADY_EXISTS |
Class already exists. |
1411 |
ERROR_CLASS_DOES_NOT_EXIST |
Class does not exist. |
1412 |
ERROR_CLASS_HAS_WINDOWS |
Class still has open
windows. |
1413 |
ERROR_INVALID_INDEX |
The index is invalid. |
1414 |
ERROR_INVALID_ICON_HANDLE |
The icon handle is
invalid. |
1415 |
ERROR_PRIVATE_DIALOG_INDEX |
Using private DIALOG
window words. |
1416 |
ERROR_LISTBOX_ID_NOT_FOUND |
List box ID not
found. |
1417 |
ERROR_NO_WILDCARD_CHARACTERS |
No wildcard
characters found. |
1418 |
ERROR_CLIPBOARD_NOT_OPEN |
Thread doesn't have
clipboard open. |
1419 |
ERROR_HOTKEY_NOT_REGISTERED |
Hotkey is not
registered. |
1420 |
ERROR_WINDOW_NOT_DIALOG |
The window is not a
valid dialog window. |
1421 |
ERROR_CONTROL_ID_NOT_FOUND |
Control ID not found. |
1422 |
ERROR_INVALID_COMBOBOX_MESSAGE |
Invalid Message,
combo box doesn't have an edit control. |
1423 |
ERROR_WINDOW_NOT_COMBOBOX |
The window is not a
combo box. |
1424 |
ERROR_INVALID_EDIT_HEIGHT |
Height must be less
than 256. |
1425 |
ERROR_DC_NOT_FOUND |
Invalid HDC passed to
ReleaseDC. |
1426 |
ERROR_INVALID_HOOK_FILTER |
The hook filter type
is invalid. |
1427 |
ERROR_INVALID_FILTER_PROC |
The filter proc is
invalid. |
1428 |
ERROR_HOOK_NEEDS_HMOD |
Cannot set non-local
hook without an module handle. |
1429 |
ERROR_GLOBAL_ONLY_HOOK |
This hook can only be
set globally. |
1430 |
ERROR_JOURNAL_HOOK_SET |
The journal hook is
already installed. |
1431 |
ERROR_HOOK_NOT_INSTALLED |
Hook is not
installed. |
1432 |
ERROR_INVALID_LB_MESSAGE |
The message for
single-selection list box is invalid. |
1433 |
ERROR_SETCOUNT_ON_BAD_LB |
LB_SETCOUNT sent to
non-lazy list box. |
1434 |
ERROR_LB_WITHOUT_TABSTOPS |
This list box doesn't
support tab stops. |
1435 |
ERROR_DESTROY_OBJECT_OF_OTHER_THREAD |
Cannot destroy object
created by another thread. |
1436 |
ERROR_CHILD_WINDOW_MENU |
Child windows can't
have menus. |
1437 |
ERROR_NO_SYSTEM_MENU |
Window does not have
system menu. |
1438 |
ERROR_INVALID_MSGBOX_STYLE |
The message box style
is invalid. |
1439 |
ERROR_INVALID_SPI_VALUE |
The SPI_* parameter
is invalid. |
1440 |
ERROR_SCREEN_ALREADY_LOCKED |
Screen already
locked. |
1441 |
ERROR_HWNDS_HAVE_DIFFERENT_PARENT |
All
DeferWindowPosHWNDs must have same parent. |
1442 |
ERROR_NOT_CHILD_WINDOW |
Window is not a child
window. |
1443 |
ERROR_INVALID_GW_COMMAND |
The GW_* command is
invalid. |
1444 |
ERROR_INVALID_THREAD_ID |
The thread ID is
invalid. |
1445 |
ERROR_NON_MDICHILD_WINDOW |
DefMDIChildProccalled
with a non-MDI child window. |
1446 |
ERROR_POPUP_ALREADY_ACTIVE |
Pop-up menu already
active. |
1447 |
ERROR_NO_SCROLLBARS |
Window does not have
scroll bars. |
1448 |
ERROR_INVALID_SCROLLBAR_RANGE |
Scrollbar range
greater than 0x7FFF. |
1449 |
ERROR_INVALID_SHOWWIN_COMMAND |
The ShowWindowcommand
is invalid. |
1450 |
ERROR_NO_SYSTEM_RESOURCES |
Insufficient system
resources exist to complete the requested service. |
1451 |
ERROR_NONPAGED_SYSTEM_RESOURCES |
Insufficient system
resources exist to complete the requested service. |
1452 |
ERROR_PAGED_SYSTEM_RESOURCES |
Insufficient system
resources exist to complete the requested service. |
1453 |
ERROR_WORKING_SET_QUOTA |
Insufficient quota to
complete the requested service. |
1454 |
ERROR_PAGEFILE_QUOTA |
Insufficient quota to
complete the requested service. |
1455 |
ERROR_COMMITMENT_LIMIT |
The paging file is
too small for this operation to complete. |
1456 |
ERROR_MENU_ITEM_NOT_FOUND |
A menu item was not
found. |
1457 |
ERROR_INVALID_KEYBOARD_HANDLE |
Invalid keyboard
layout handle. |
1458 |
ERROR_HOOK_TYPE_NOT_ALLOWED |
Hook type not
allowed. |
1500 |
ERROR_EVENTLOG_FILE_CORRUPT |
One of the Eventlog
logfiles is damaged. |
1501 |
ERROR_EVENTLOG_CANT_START |
No event log file
could be opened, so the event logging service did not start. |
1502 |
ERROR_LOG_FILE_FULL |
The event log file is
full. |
1503 |
ERROR_EVENTLOG_FILE_CHANGED |
The event log file
has changed between reads. |
1700 |
RPC_S_INVALID_STRING_BINDING |
The string binding is
invalid. |
1701 |
RPC_S_WRONG_KIND_OF_BINDING |
The binding handle is
the incorrect type. |
1702 |
RPC_S_INVALID_BINDING |
The binding handle is
invalid. |
1703 |
RPC_S_PROTSEQ_NOT_SUPPORTED |
The RPC protocol
sequence is not supported. |
1704 |
RPC_S_INVALID_RPC_PROTSEQ |
The RPC protocol
sequence is invalid. |
1705 |
RPC_S_INVALID_STRING_UUID |
The string UUID is
invalid. |
1706 |
RPC_S_INVALID_ENDPOINT_FORMAT |
The endpoint format
is invalid. |
1707 |
RPC_S_INVALID_NET_ADDR |
The network address
is invalid. |
1708 |
RPC_S_NO_ENDPOINT_FOUND |
No endpoint was
found. |
1709 |
RPC_S_INVALID_TIMEOUT |
The timeout value is
invalid. |
1710 |
RPC_S_OBJECT_NOT_FOUND |
The object UUID was
not found. |
1711 |
RPC_S_ALREADY_REGISTERED |
The object UUID
already registered. |
1712 |
RPC_S_TYPE_ALREADY_REGISTERED |
The type UUID is
already registered. |
1713 |
RPC_S_ALREADY_LISTENING |
The server is already
listening. |
1714 |
RPC_S_NO_PROTSEQS_REGISTERED |
No protocol sequences
were registered. |
1715 |
RPC_S_NOT_LISTENING |
The server is not
listening. |
1716 |
RPC_S_UNKNOWN_MGR_TYPE |
The manager type is
unknown. |
1717 |
RPC_S_UNKNOWN_IF |
The interface is
unknown. |
1718 |
RPC_S_NO_BINDINGS |
There are no
bindings. |
1719 |
RPC_S_NO_PROTSEQS |
There are no protocol
sequences. |
1720 |
RPC_S_CANT_CREATE_ENDPOINT |
The endpoint cannot
be created. |
1721 |
RPC_S_OUT_OF_RESOURCES |
Not enough resources
are available to complete this operation. |
1722 |
RPC_S_SERVER_UNAVAILABLE |
The server is
unavailable. |
1723 |
RPC_S_SERVER_TOO_BUSY |
The server is too
busy to complete this operation. |
1724 |
RPC_S_INVALID_NETWORK_OPTIONS |
The network options
are invalid. |
1725 |
RPC_S_NO_CALL_ACTIVE |
There is not a remote
procedure call active in this thread. |
1726 |
RPC_S_CALL_FAILED |
The remote procedure
call failed. |
1727 |
RPC_S_CALL_FAILED_DNE |
The remote procedure
call failed and did not execute. |
1728 |
RPC_S_PROTOCOL_ERROR |
An RPC protocol error
occurred. |
1730 |
RPC_S_UNSUPPORTED_TRANS_SYN |
The transfer syntax
is not supported by the server. |
1731 |
RPC_S_SERVER_OUT_OF_MEMORY |
The server has
insufficient memory to complete this operation. |
1732 |
RPC_S_UNSUPPORTED_TYPE |
The type UUID is not
supported. |
1733 |
RPC_S_INVALID_TAG |
The tag is invalid. |
1734 |
RPC_S_INVALID_BOUND |
The array bounds are
invalid. |
1735 |
RPC_S_NO_ENTRY_NAME |
The binding does not
contain an entry name. |
1736 |
RPC_S_INVALID_NAME_SYNTAX |
The name syntax is
invalid. |
1737 |
RPC_S_UNSUPPORTED_NAME_SYNTAX |
The name syntax is
not supported. |
1739 |
RPC_S_UUID_NO_ADDRESS |
No network address is
available to use to construct a UUID. |
1740 |
RPC_S_DUPLICATE_ENDPOINT |
The endpoint is a
duplicate. |
1741 |
RPC_S_UNKNOWN_AUTHN_TYPE |
The authentication
type is unknown. |
1742 |
RPC_S_MAX_CALLS_TOO_SMALL |
The maximum number of
calls is too small. |
1743 |
RPC_S_STRING_TOO_LONG |
The string is too
long. |
1744 |
RPC_S_PROTSEQ_NOT_FOUND |
The RPC protocol
sequence was not found. |
1745 |
RPC_S_PROCNUM_OUT_OF_RANGE |
The procedure number
is out of range. |
1746 |
RPC_S_BINDING_HAS_NO_AUTH |
The binding does not
contain any authentication information. |
1747 |
RPC_S_UNKNOWN_AUTHN_SERVICE |
The authentication
service is unknown. |
1748 |
RPC_S_UNKNOWN_AUTHN_LEVEL |
The authentication
level is unknown. |
1749 |
RPC_S_INVALID_AUTH_IDENTITY |
The security context
is invalid. |
1750 |
RPC_S_UNKNOWN_AUTHZ_SERVICE |
The authorization
service is unknown. |
1751 |
EPT_S_INVALID_ENTRY |
The entry is invalid. |
1752 |
EPT_S_CANT_PERFORM_OP |
The operation cannot
be performed. |
1753 |
EPT_S_NOT_REGISTERED |
There are no more
endpoints available from the endpoint mapper. |
1755 |
RPC_S_INCOMPLETE_NAME |
The entry name is
incomplete. |
1756 |
RPC_S_INVALID_VERS_OPTION |
The version option is
invalid. |
1757 |
RPC_S_NO_MORE_MEMBERS |
There are no more
members. |
1758 |
RPC_S_NOT_ALL_OBJS_UNEXPORTED |
There is nothing to
unexport. |
1759 |
RPC_S_INTERFACE_NOT_FOUND |
The interface was not
found. |
1760 |
RPC_S_ENTRY_ALREADY_EXISTS |
The entry already
exists. |
1761 |
RPC_S_ENTRY_NOT_FOUND |
The entry is not
found. |
1762 |
RPC_S_NAME_SERVICE_UNAVAILABLE |
The name service is
unavailable. |
1764 |
RPC_S_CANNOT_SUPPORT |
The requested
operation is not supported. |
1765 |
RPC_S_NO_CONTEXT_AVAILABLE |
No security context
is available to allow impersonation. |
1766 |
RPC_S_INTERNAL_ERROR |
An internal error
occurred in RPC. |
1767 |
RPC_S_ZERO_DIVIDE |
The server attempted
an integer divide by zero. |
1768 |
RPC_S_ADDRESS_ERROR |
An addressing error
occurred in the server. |
1769 |
RPC_S_FP_DIV_ZERO |
A floating point
operation at the server caused a divide by zero. |
1770 |
RPC_S_FP_UNDERFLOW |
A floating point
underflow occurred at the server. |
1771 |
RPC_S_FP_OVERFLOW |
A floating point
overflow occurred at the server. |
1772 |
RPC_X_NO_MORE_ENTRIES |
The list of servers
available for auto_handle binding was exhausted. |
1773 |
RPC_X_SS_CHAR_TRANS_OPEN_FAIL |
The file designated
by DCERPCCHARTRANS cannot be opened. |
1774 |
RPC_X_SS_CHAR_TRANS_SHORT_FILE |
The file containing
the character translation table has fewer than 512 bytes. |
1775 |
RPC_X_SS_IN_NULL_CONTEXT |
A null context handle
is passed as an [in] parameter. |
1776 |
RPC_X_SS_CONTEXT_MISMATCH |
The context handle
does not match any known context handles. |
1777 |
RPC_X_SS_CONTEXT_DAMAGED |
The context handle
changed during a call. |
1778 |
RPC_X_SS_HANDLES_MISMATCH |
The binding handles
passed to a remote procedure call do not match. |
1779 |
RPC_X_SS_CANNOT_GET_CALL_HANDLE |
The stub is unable to
get the call handle. |
1780 |
RPC_X_NULL_REF_POINTER |
A null reference
pointer was passed to the stub. |
1781 |
RPC_X_ENUM_VALUE_OUT_OF_RANGE |
The enumeration value
is out of range. |
1782 |
RPC_X_BYTE_COUNT_TOO_SMALL |
The byte count is too
small. |
1783 |
RPC_X_BAD_STUB_DATA |
The stub received bad
data. |
1784 |
ERROR_INVALID_USER_BUFFER |
The supplied user
buffer is invalid for the requested operation. |
1785 |
ERROR_UNRECOGNIZED_MEDIA |
The disk media is not
recognized. It may not be formatted. |
1786 |
ERROR_NO_TRUST_LSA_SECRET |
The workstation does
not have a trust secret. |
1787 |
ERROR_NO_TRUST_SAM_ACCOUNT |
The domain controller
does not have an account for this workstation. |
1788 |
ERROR_TRUSTED_DOMAIN_FAILURE |
The trust
relationship between the primary domain and the trusted domain failed. |
1789 |
ERROR_TRUSTED_RELATIONSHIP_FAILURE |
The trust
relationship between this workstation and the primary domain failed. |
1790 |
ERROR_TRUST_FAILURE |
The network logon
failed. |
1791 |
RPC_S_CALL_IN_PROGRESS |
A remote procedure
call is already in progress for this thread. |
1792 |
ERROR_NETLOGON_NOT_STARTED |
An attempt was made
to logon, but the network logon service was not started. |
1793 |
ERROR_ACCOUNT_EXPIRED |
The user's account
has expired. |
1794 |
ERROR_REDIRECTOR_HAS_OPEN_HANDLES |
The redirector is in
use and cannot be unloaded. |
1795 |
ERROR_PRINTER_DRIVER_ALREADY_INSTALLED |
The specified printer
driver is already installed. |
1796 |
ERROR_UNKNOWN_PORT |
The specified port is
unknown. |
1797 |
ERROR_UNKNOWN_PRINTER_DRIVER |
The printer driver is
unknown. |
1798 |
ERROR_UNKNOWN_PRINTPROCESSOR |
The print processor
is unknown. |
1799 |
ERROR_INVALID_SEPARATOR_FILE |
The specified
separator file is invalid. |
1800 |
ERROR_INVALID_PRIORITY |
The specified
priority is invalid. |
1801 |
ERROR_INVALID_PRINTER_NAME |
The printer name is
invalid. |
1802 |
ERROR_PRINTER_ALREADY_EXISTS |
The printer already
exists. |
1803 |
ERROR_INVALID_PRINTER_COMMAND |
The printer command
is invalid. |
1804 |
ERROR_INVALID_DATATYPE |
The specified
datatype is invalid. |
1805 |
ERROR_INVALID_ENVIRONMENT |
The Environment
specified is invalid. |
1806 |
RPC_S_NO_MORE_BINDINGS |
There are no more
bindings. |
1807 |
ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT |
The account used is
an interdomain trust account. Use your normal user account or remote user
account to access this server. |
1808 |
ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT |
The account used is a
workstation trust account. Use your normal user account or remote user
account to access this server. |
1809 |
ERROR_NOLOGON_SERVER_TRUST_ACCOUNT |
The account used is
an server trust account. Use your normal user account or remote user account
to access this server. |
1810 |
ERROR_DOMAIN_TRUST_INCONSISTENT |
The name or security
ID (SID) of the domain specified is inconsistent with the trust information
for that domain. |
1811 |
ERROR_SERVER_HAS_OPEN_HANDLES |
The server is in use
and cannot be unloaded. |
1812 |
ERROR_RESOURCE_DATA_NOT_FOUND |
The specified image
file did not contain a resource section. |
1813 |
ERROR_RESOURCE_TYPE_NOT_FOUND |
The specified
resource type can not be found in the image file. |
1814 |
ERROR_RESOURCE_NAME_NOT_FOUND |
The specified
resource name can not be found in the image file. |
1815 |
ERROR_RESOURCE_LANG_NOT_FOUND |
The specified
resource language ID cannot be found in the image file. |
1816 |
ERROR_NOT_ENOUGH_QUOTA |
Not enough quota is
available to process this command. |
1817 |
RPC_S_NO_INTERFACES |
|
1818 |
RPC_S_CALL_CANCELLED |
The server was
altered while processing this call. |
1819 |
RPC_S_BINDING_INCOMPLETE |
The binding handle
does not contain all required information. |
1820 |
RPC_S_COMM_FAILURE |
Communications
failure. |
1821 |
RPC_S_UNSUPPORTED_AUTHN_LEVEL |
The requested
authentication level is not supported. |
1822 |
RPC_S_NO_PRINC_NAME |
No principal name
registered. |
1823 |
RPC_S_NOT_RPC_ERROR |
The error specified
is not a valid Windows RPC error code. |
1824 |
RPC_S_UUID_LOCAL_ONLY |
A UUID that is valid
only on this computer has been allocated. |
1825 |
RPC_S_SEC_PKG_ERROR |
A security package
specific error occurred. |
1826 |
RPC_S_NOT_CANCELLED |
Thread is not
cancelled. |
1827 |
RPC_X_INVALID_ES_ACTION |
Invalid operation on
the encoding/decoding handle. |
1828 |
RPC_X_WRONG_ES_VERSION |
Incompatible version
of the serializing package. |
1829 |
RPC_X_WRONG_STUB_VERSION |
Incompatible version
of the RPC stub. |
1830 |
RPC_X_INVALID_PIPE_OBJECT |
The idl pipe object
is invalid or corrupted. |
1831 |
RPC_X_INVALID_PIPE_OPERATION |
The operation is
invalid for a given idl pipe object. |
1832 |
RPC_X_WRONG_PIPE_VERSION |
The idl pipe version
is not supported. |
1898 |
RPC_S_GROUP_MEMBER_NOT_FOUND |
The group member was
not found. |
1899 |
EPT_S_CANT_CREATE |
The endpoint mapper
database could not be created. |
1900 |
RPC_S_INVALID_OBJECT |
The object universal
unique identifier (UUID) is the nil UUID. |
1901 |
ERROR_INVALID_TIME |
The specified time is
invalid. |
1902 |
ERROR_INVALID_FORM_NAME |
The specified Form
name is invalid. |
1903 |
ERROR_INVALID_FORM_SIZE |
The specified Form
size is invalid |
1904 |
ERROR_ALREADY_WAITING |
The specified Printer
handle is already being waited on |
1905 |
ERROR_PRINTER_DELETED |
The specified Printer
has been deleted |
1906 |
ERROR_INVALID_PRINTER_STATE |
The state of the
Printer is invalid |
1907 |
ERROR_PASSWORD_MUST_CHANGE |
The user must change
his password before he logs on the first time. |
1908 |
ERROR_DOMAIN_CONTROLLER_NOT_FOUND |
Could not find the
domain controller for this domain. |
1909 |
ERROR_ACCOUNT_LOCKED_OUT |
The referenced
account is currently locked out and may not be logged on to. |
1910 |
OR_INVALID_OXID |
The object exporter
specified was not found. |
1911 |
OR_INVALID_OID |
The object specified
was not found. |
1912 |
OR_INVALID_SET |
The object resolver
set specified was not found. |
1913 |
RPC_S_SEND_INCOMPLETE |
Some data remains to
be sent in the request buffer. |
2000 |
ERROR_INVALID_PIXEL_FORMAT |
The pixel format is
invalid. |
2001 |
ERROR_BAD_DRIVER |
The specified driver
is invalid. |
2002 |
ERROR_INVALID_WINDOW_STYLE |
The window style or
class attribute is invalid for this operation. |
2003 |
ERROR_METAFILE_NOT_SUPPORTED |
The requested
metafile operation is not supported. |
2004 |
ERROR_TRANSFORM_NOT_SUPPORTED |
The requested
transformation operation is not supported. |
2005 |
ERROR_CLIPPING_NOT_SUPPORTED |
The requested
clipping operation is not supported. |
2138 |
ERROR_NO_NETWORK |
The network is not
present or not started. |
2202 |
ERROR_BAD_USERNAME |
The specified user
name is invalid. |
2250 |
ERROR_NOT_CONNECTED |
This network
connection does not exist. |
2401 |
ERROR_OPEN_FILES |
There are open files
or requests pending on this connection. |
2402 |
ERROR_ACTIVE_CONNECTIONS |
Active connections
still exist. |
2404 |
ERROR_DEVICE_IN_USE |
The device is in use
by an active process and cannot be disconnected. |
3000 |
ERROR_UNKNOWN_PRINT_MONITOR |
The specified print
monitor is unknown. |
3001 |
ERROR_PRINTER_DRIVER_IN_USE |
The specified printer
driver is currently in use. |
3002 |
ERROR_SPOOL_FILE_NOT_FOUND |
The spool file was
not found. |
3003 |
ERROR_SPL_NO_STARTDOC |
A StartDocPrinter
call was not issued. |
3004 |
ERROR_SPL_NO_ADDJOB |
An AddJob call was
not issued. |
3005 |
ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED |
The specified print
processor has already been installed. |
3006 |
ERROR_PRINT_MONITOR_ALREADY_INSTALLED |
The specified print
monitor has already been installed. |
3007 |
ERROR_INVALID_PRINT_MONITOR |
The specified print
monitor does not have the required functions. |
3008 |
ERROR_PRINT_MONITOR_IN_USE |
The specified print
monitor is currently in use. |
3009 |
ERROR_PRINTER_HAS_JOBS_QUEUED |
The requested
operation is not allowed when there are jobs queued to the printer. |
3010 |
ERROR_SUCCESS_REBOOT_REQUIRED |
The requested
operation is successful. Changes will not be effective until the system is
rebooted. |
3011 |
ERROR_SUCCESS_RESTART_REQUIRED |
The requested
operation is successful. Changes will not be effective until the service is
restarted. |
4000 |
ERROR_WINS_INTERNAL |
WINS encountered an
error while processing the command. |
4001 |
ERROR_CAN_NOT_DEL_LOCAL_WINS |
The local WINS can
not be deleted. |
4002 |
ERROR_STATIC_INIT |
The importation from
the file failed. |
4003 |
ERROR_INC_BACKUP |
The backup failed.
Was a full backup done before ? |
4004 |
ERROR_FULL_BACKUP |
The backup failed.
Check the directory that you are backing the database to. |
4005 |
ERROR_REC_NON_EXISTENT |
The name does not
exist in the WINS database. |
4006 |
ERROR_RPL_NOT_ALLOWED |
Replication with a
non-configured partner is not allowed. |
6118 |
ERROR_NO_BROWSER_SERVERS_FOUND |
The list of servers
for this workgroup is not currently available |